Solutions for Massachusetts Businesses

Upgrades for Commercial & Industrial Refrigeration

Secure trusted retrofit improvements for your walk-in coolers or freezers that improve performance and save energy, and have your utility pay for it through project incentives. As an approved contractor, NRM provides zero-finger-lift solutions by handling the entire process for you from idea to install.

COLD is the new GREEN.

With demand continuing to grow, your utility provider recognizes they need to “buy back” electricity from their commercial customers with smaller energy footprints and divert it to larger ones who really need it. And in states like Massachusetts, where there are fewer and fewer ways for the utility companies to generate new electricity, they’re looking to get creative with their strategies to solve these energy issues.

As a result, NRM can offer approved solutions as a program partner, with a unique focus on commercial and industrial refrigeration systems.

And implementing these optimizations may qualify for big incentives from the utility sponsors of the Mass Save program. But incentives are limited on a first-come, first-served basis, so you must act now.

Your walk-in cooler is sized to handle the single hottest day of the year.

That means for the other 364 days your refrigeration system is working harder than it needs to, both wasting kWh and costing you real dollars in your monthly commercial electric bill.

Consider it: why should your equipment be working just as hard in the middle of January as it does in the middle of July?

For many Massachusetts small businesses with refrigeration, this inefficient operation results in their walk-in being their biggest electricity hog month after month. But it doesn’t have to be.

Don't miss your chance to qualify for generous incentives that decrease the up-front cost of your retrofit project. But incentives are first-come, first-served so you must act fast.

Typical components for upgrades:

Smart Controls

NRM’s unique refrigeration controls offer a full spread of enhancements to your commercial refrigeration system. From tracking insightful operational data to optimizing multiple components of the system, your system can achieve so much more than just “running all the time.” You’ll have actionable data and one-touch settings at your fingerprints at all times.

Optimizing your evaporator fans is one of the simplest but most effective ways to see big efficiency improvements in your operation.

Most fan sets run 24/7 whether they need to be running to satisfy temperatures or not. Think about it: your evaporator fans are running while you sleep even though no one is using the cooler, costing you more money on your electric bill.

NRM can control the fans to run only when they’re required to satisfy space temperatures. This typically reduces their runtimes by 40-60%.

The anti-condensation door heaters on your product coolers are typically a large opportunity for energy savings. By default, these heaters are on all the time, regardless of whether there are customers opening and closing the doors constantly creating moisture.

NRM’s controls can reduce their runtimes by 85-95% and only run when they have to.

Does it seem wasteful for your small product coolers storing water and soft drinks to keep running even when your business is closed? Especially when you consider that things like soda are unaffected by changes in temperature.

These stand-alone coolers can be optimized to run around your business hours.

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

Ready to get started? Fill out this short form and we'll be in touch within 24 hours!

With some preliminary information about your business, such as current facility operations, energy costs, and most importantly your optimization goals, we can give you a general idea of how we may be able to help.

From there, we’ll decide together the next best step to take. It could be a full, no-obligation refrigeration assessment to identify your actual opportunities, or it could be checking with your utility provider if they offer any incentives for energy-efficiency projects.

It couldn't be easier to get your upgrades.

"I’m extremely happy with NRM’s controls and would recommend them to any other business owner on the island that has walk-in coolers. Brian, their installer, was very helpful throughout the whole process and showed me how I would be saving energy. I’ve had the controls for 14 years, and look forward to another 14 of saving money."

— John Averill, Owner

Massachusetts Success Stories

Orleans Seafood Market

With NRM's help, they are now able to save $2,400 and 13,600 kWh every year from their commercial electric bill.

Aeronaut Brewery

With NRM's help, they are now able to save $2,600 and 17,500 kWh every year from their commercial electric bill.

Valley Liquors

With NRM's help, they are now able to save $1,400 and 8,000 kWh every year from their commercial electric bill.

Vineyard Cash & Carry

With NRM's help, they are now able to save $6,500 and 40,000 kWh every year from their commercial electric bill.

Pittsfield Rye

With NRM's help, they are now able to save $21,000 and 115,000 kWh every year from their commercial electric bill.

J. Pace & Son

With NRM's help, they are now able to save $2,650 and 15,600 kWh every year from their commercial electric bill.

Captain Parker's Pub

With NRM's help, they are now able to save $3,300 and 16,000 kWh every year from their commercial electric bill.

Rt. 6 Beer & Wine

With NRM's help, they are now able to save $3,600 and 21,000 kWh every year from their commercial electric bill.

Frequently Asked Questions

Refrigeration and HVAC equipment are sized for THE HOTTEST DAYS of the year, and they always add a safety factor in case more is needed. But the “hottest days” only happen 20-30 times per year, which means all systems are oversized for the other 330~ days. The CoolTrol® system manages all the loads to take advantage of the oversizing, and turns off loads that don’t need to be on all the time. It also manages defrost more closely to what is needed. Some facilities have very big cold rooms so they add redundant systems meaning that capacity can sometimes be 2-4x of what is needed on average days.

In an unsafe manner, yes. But with NRM’s solution, it is perfectly safe. Implemented in over 50,000 systems to-date, the new controls keep fans running when refrigeration is ON and only cycles them OFF and whenever refrigeration is OFF. Every running fan motor generates heat and the new system run time when air movement is not necessary. Why keep the heaters running once temperature set point is reached?

NRM has earned the utility’s trust and confidence, which is the greatest guarantee we can offer. In some programs, NRM has been providing solutions since 1997 with the local utility company’s backing. We would not continue to win these contracts year over year if we didn’t produce deliver the projected savings. 

Most states have adopted laws to get citizens and companies to use less energy as it is more economical to encourage consumers to use less energy through incentives than to build a new power plant which no one wants near them. Utilities are tasked with collecting a fee on your utility bill based on usage. It may be a line item shown as “public benefit charge” or “energy conservation charge”. This money accumulates and is used to fund the incentives that pay for energy efficiency optimizations. Since it is available for all ratepayers, it is a great way to fund energy efficiency programs that give capacity back to the electrical grid while also reducing your commercial electric bill. So it’s a smart investment to participate in the programs and to take advantage of the incentives to get some of your money back through upgrades to your own equipment. The money isn’t free, but it will contribute toward qualified energy efficiency projects. It’s a great way to make a difference to your bottom line.

It really depends on how much energy a project can save… just think of it as the utility buying capacity from you to prevent overtaxing the energy grid. The power you save now becomes available to new customers. To find out what you can get, we recommend a no cost assessment of your current system that will enable us to calculate savings that we then present to your utility company who allots the amount they will pay for your capacity. If your systems already are considered partially or totally energy efficient, there may be little or no opportunity for reducing energy or qualifying for an incentive.

CoolTrol® is designed specifically for you, the end user. It is equipped with software developed by NRM and is designed to intelligently operate equipment at optimum energy efficiency.  It becomes your new refrigeration thermostat that takes advantage of every opportunity for saving energy. It has many user-friendly features and a superior user interface compared to traditional refrigeration thermostats that are primarily designed for technicians, not end users.

"Before we purchased RSM, it was literally a full-time job manually checking the temperatures of all of our refrigeration. We have five trailers, a blast freezer, a utility freezer, and a walk-in cooler. With RSM, I can simply check my iPad and have all of that information at my fingertips 24 hours a day, anywhere I am. I love the system and would highly recommend it."

— Rick Robbins, Owner

Let's talk about your project today